Reviews

Solved Sunrace Compatibility

Posted on 12 January 2021 about V3 BOOST Rear Hub - 32 Hole by G. Rossari

The trick is really simple: remove the cap, screw the Sunrace XD adapter hub, tighten with the cassette key, put the cap back on, fit the chainrings, tighten the locking ring and ZAP! everything is ready! Once again the Supercomponents hubs proved to be a great choice!

12/14T On Sram Eagle Xx1 Axs

Posted on 9 January 2021 about 12 / 14T Jockey Wheels For SRAM EAGLE - UK Made by I. Diggle

Read other reviews -neither jockey wheels in my AXS kit have high / low teeth. My Superstar kit came with 14T wheel without and 12T wheel with high / low teeth. Didn't work and only replaced bottom wheel.

 

Superstar Reply - This isnt possible as we only make 14T with narrow wide... there is no reason not to use narrow wide apart from its more expensive to manufacture. Not

Awesome!

Posted on 2 January 2021 about Raptor Chainring SRAM 3mm OFFSET OVAL Direct Mount - Narrow Wide by B. Tilford

Top quality at great price, no issues at all, received next day!

Delivery Slow

Posted on 9 December 2020 about 12 / 14T Jockey Wheels For SRAM EAGLE - UK Made by M. Dodds

I ordered this 11 days ago, still no sign of it arriving and just getting a repeated message that I should wait a few more days.. pretty frustrating as my bike is out of action.

 

Superstar Comment - there is a pandemic on and christmas mail volume issues. We apolagise that royal mail are crazy busy and hugely behind but there is little we can do.

Great Jockey Wheels

Posted on 20 October 2020 about 11T Jockey Wheels - UK Made by C. Ball

Had these jockey wheels in red with the titanium bolts. Easy to replace the old ones with these. Chain drive spins really easy and is very noticeable when riding. Great value for ceramic bearings. Service excellent as well. Many thanks

Ok

Posted on 21 September 2020 about 12 / 14T Jockey Wheels For SRAM EAGLE - UK Made by S. Hill

Bearings are good however, one of mine had a bit of play, even with the bearing covers on snug and bolted into the mech. Also, having narrow-wide on BOTH wheels means that it can sometimes end up mis-aligned after I've been through a rough section, i suspect this is the reason the OE jockey wheels don't feature this on both.

 

Superstar Reply:

Hello if your jockey w

Can't Fault Them

Posted on 21 September 2020 about 12T Jockey Wheels For SRAM 11speed - UK Made by S. Hill

Great replacement for the crap plastic ones that came with my Sram NX 11 speed. Nice colour, no extra noise vs the plastic ones, good bearings. shifting perfectly after a few months of use.

I Fordyce

Posted on 8 September 2020 about Slackerizer Angle Headset - 2 Degree - UK Made by I. Fordyce

Outstanding Over the moon its amazing what just 2 degrees does to the look of your bike only just finished fitting it so not sure how it feels yet but I'm pretty sure it will be excellent had a little bit of grief fitting the bearing Cup it was a little tight so I used a Dremel to take just a tiny bit off the inside of the head and put a bit of grease on and the cups went on sweet as a nut one th

Wow

Posted on 7 September 2020 about Raptor Chainring SRAM 3mm OFFSET Direct Mount - Narrow Wide by G. Rossari

perfectly compatible with Sram GX 12V. Plus? the unmistakable SUPERSTAR COMPONENTS style!

Nice Kit, Great Price

Posted on 28 August 2020 about UK Made Headset - Complete by B. Wood

Purchased a ZS44 headset in blue. Was going to go for an FSA headset but had previously purchased an out front mount from Superstar, and so decided to give one of their headsets a try. Apart from a slightly different stack height, which was going to be the case, the headset pressed in well, albeit a little tight, but tighter equals less wobble room. Top components. Great stuff!